Welcome to Your New Device!

Here's a link to the Healy manual.
https://fliphtml5.com/jbnfl/vweu/basic

​Here's the latest video on learning the Pink app, which is the first one you will use. Just run gold programs for at the least the first week. This is a long video, but it's time coded if you wish to skip ahead. See below the video.

0:00 Intro/How to Subscribe to this Channel/Updates/Trainings
6:50 “What is that thing?” (The elevator speeches)
8:45 My Healy has arrived, now what” (charging tips, etc.)
15:45 Minimum Operating for IOS and Android
21:00 How to Download the App (detailed descriptions of the App, Phone, WiFi, Settings and Tips
37:13 Opening the Pink App and Connecting to Healy, Bluetooth, hard-closing apps, common challenges and solutions 50:00 How to Input Healy Serial Number and QR Code
56:00 Where are my programs? Healy App MENU/Settings/Check for Updates/Loading Apps
1:06:35 Time to run the programs! Gold Cycle Program descriptions
1:08:00 Where is the Healy Manual? (Instructions for Use)
1:18:47 Let’s Hook Up! Wristbands, cables, gel, sticky pads ..Tips
1:26:20 All connected—-Let’s run a program!
1:31:00 Positive and Negative Ports Explained/Rebooting the App
1:35:00 HARD RESET directions
1:38:12 DEMO...How to run a program with full explanation of frequencies, density, white and black bars, and what factors affect the transmission of frequencies
1:49:10 My device won’t connect, now what? Troubleshooting tips (bands, cables, sticky pads, conductivity)
2:01:00 Explanation of the program frequencies in the ‘progress percentage’ area
2:06:30 How to pause/close the program, Battery Percentage, Blue Tooth signal strength
2:11:30 Pain and Local Stimulation Questions and Answers
2:21:00 Brief description of contents of each Healy Edition, Bioenergetic Support and Therapist TAN explained
2:24:30 How to download Pink App on Android devices.

Below is an older video on a quick start with your Healy.

Please watch the above step-by-step instructions to get started.

NOTE: Please charge your Healy before using. The green light will go on when you plug it in. Do not use until the green light goes off. Minimum 90 min. (Use your Smartphone's USB Plug.) However, others say to charge it a full 14 hours for only the first time you use it.
​
Notes from Video: Search for "Healy App" in
App Store or Google Play and download.
​It looks like this:


BEFORE you use the HEALY:  
1-Drink Water. Extra hydration is vital for great results. A general rule of thumb is to drink more than 1/2 oz of water per pound of body weight per day (e.g. more than 60 oz of water for a 120 pound person). Most people are dehydrated. Drink water before and during a session. You can add electrolytes if you like.

2-Breathe. Take a few deep, slow breaths to become more centered and present.  

3-Set your intention. Your intention may be as simple as “to relax”, “to let go of pain," “mental clarity.”
You are using with a powerful tool that is enabling you to connect to higher consciousness. Be mindful every time you use your Healy.

4-Track your progress. Write down your health challenges on a scale of 1-10 and take a photo of any areas of focus.

Using the HEALY:  

1-Turn Healy on (press button in center, green light blinks).
​
2-Open the Healy App and click on the Gold Program of Choice. It is recommended to use PURE first. Then CARE or use RELEASE if you're in pain.

​Tip: If you are new to Frequencies or sensitive, use only one program on Day 1. Use one the next day and see how you feel. Go slow. Use two programs after a few days. 

Start slow and work up to a maximum of 3-4 programs per day. If you're fragile or have health issues, you may want to use less programs per day.

*If you are experiencing local pain, then obviously this is a priority.  Use the Local Pain program with the pads to direct the energy to the area of pain. 

A general guide is to use Healy for 3-4 days, then take a day off. 
​
3-Connect the Electrodes according to the diagram on screen (pads or wrist) to you and the Healy.

4-Press the “+” or "minus" to increase the percentage until you feel it. Using it at 100% does not equate to a more effective session. Experts in frequencies say to keep it at 15 to 30. Less is more. One expert said, "If you are feeling it, it is not microcurrent." I usually keep mine on 15, 20, or 25. Experiment with the numbers to find what's right for you. 

​Tip: Bluetooth must be on.

Tip: Connection challenges have been easily fixed by closing the app, and restarting the app. So if t's slow, simply quite the app and restart it. If you're still having issues, quit your phone and restart. That usually fixes it. If not, then turn bluetooth off and on, or reinstall the app. If you are still stuck, email: sales.support.us@healyworld.net

Tip: Dehydrated? (The line stays black) LIGHTLY mist the skin or the inside of the wrist bracelets with water. 

Note: Only one program is downloaded at a time from the encrypted secure cloud. The last program will be on your phone when you start again.

5. Start s-l-o-w-l-y. I know you'll want to run a lot of programs because you're so excited to try them all, like I did. However, don't do that. You don't want to overdose with the Healy, especially if you have health challenges. Like with any supplementation, go slowly and build up. If you have chronic health issues, start with 1 program a day. 

Simply start with with the Gold programs for the first week. Start with PURE from the Gold program. Later on you could do RELEASE, also from the Gold program. Use the gold program for the first week to get your body used to the frequencies. (PURE can create detox.)

The second week you can build up to two gold programs and one program of your choice. Don't use too close to bedtime, unless it's a sleep program, since some Healy programs give you energy.

6. DOCUMENT your sessions—what you did and the results. Rate your pain, moods, sleep, and other issues from a 1 to 10 scale. Later on, you'll have it as a reference to compare it with previous results.
Remember to drink water! Lots of it.

7. Use the GOLD programs for 1 to 2 weeks or longer, then move into the Resonance app. Training on next web page under training menu.

Video 4. The HEALY Gold Programs.                         Video 5. About All HEALY Programs:

Use the Gold programs for the first two weeks. Two for the first week. Two for the second week along with a gram of your choice. Here's why the Gold programs help with:

​Here's the QuickStart guide for the Healy:
https://bit.ly/2zFO8Po​

NOTE: If you see black like figure 4.1.6 picture below, it's not conducting energy. 
Solutions that will fix it (if it still stays black, go to the next step):
- Make sure that the electrodes are on securely.
- Make sure the "pins" from the cords are plugged into the Healy tightly.
- Tighten your wrist bands a little. Usually, that takes care of it. If not,
- Try putting a little water (even saltwater is better if you wish to use it) on the inside of the bracelet electrodes to get more conductivity. ​You can also make a spray by dissolving Epsom salts in water.
- Also, make sure you are hydrated. Drink more water.
- If you're using the sticky pads, put water around the metal where the connectors attach.
- If you're not using the pads for a specific pain area, put the pads on your wrists' inside for more conductivity. (You can also try them on the palms of your hands.)​


From a Health Practitioner:
​I would recommend two products one, a good trace mineral product and two, A hydration product. There are plenty of good ones on the market I’m sure you could recommend them to her. Her mineral status is probably the biggest issue she’s probably been dehydrated for so long that the aqua Porins in on the surface of her cells are shut down to protect from becoming totally dehydrated. It’s a survival response of our cells when they have not received adequate hydration for months or years. Because of this there is not good electrolyte exchange of sodium potassium chloride and magnesium which means that her cells are not detoxing properly. The lymphatic enhancement technology that I’m doing with her is helping opening up her lymphatic channels and drainage pathways, but there is a lot of gunk to pull out of her cells. It’s just going to take time. However after a week or so of being on these two products she should notice being more in the white than the black.
~~~~~~
Black means not good conductivity but it doesn't mean it's not working. The person may need water, minerals or skin hydration, like using aloe or a moisturizer on the place where the wrist straps are and they need to be fairly tight to make a good connection.

Notes from Facebook:
I haven't tried the wet paper towels. However, I've noticed, when you drink water, it goes to white.
~~~~~~
​As far as I have been told you shouldn’t be going above 35%. Increasing the percentage doesn’t logically make the line go white because it has to do with connectivity. That being said I know that certain programs, where the Hz vary will occasionally go black when really low as it’s re-assessing what you are needing, and may go black then. Doesn’t mean it isn’t working.
Where the Hz stay the same like in a pain program or this one, one would expect it to stay white. Are you drinking enough water? Is it mineralized? Do you need a little US gel or water right under the wrist strap where you connect? Those things will all affect connectivity
~~~~~~~
The black line indicates that physical conductivity is NOT occurring. If you are tethered and using microcurrents, and ALL connections are secure, then corrective actions are in order. 
Hydration is fundamental to conductivity. Let’s presume you’re covered there. Then it’s the conductivity at the skin contact points. I use wrist straps when applying microcurrent programs. For conductivity I use a spray bottle with water and diluted Himalayan salt. I spritz my wrists, Plus the contact surface of the wristband before putting it on. 
Occasionally, the line will still go black. Sometimes all I have to do is move my wrist and the line is white again. Other times, a spritz or two or three will do the trick. 
I can sometimes go several hours with no conductivity issues.
​~~~~~~
Black often happens when the frequency being transmitted is very low.. conductive gel works well and yes being well hydrate

~~~~~~
Be sure skin is hydrated. In the beginning I needed to wet wrist bands or put cotton pad between wrist band and wrist. Now I just spray saline solution on wrist before starting. Magnesium spray works well too. On afhesive pads... put a small dab right in the middle of the pad.
~~~~~~
Lack of Hydration and Mineralization
~~~~~~
I had a friend who had a bad lead wire.
~~~~~~
black means the current can't flow because the electrodes are too loosely connected. Add moisture and restock.
~~~~~~
Take wet paper towels ring out always works Like
~~~~~~
New cables on www.tenspros.com
~~~~~~
I heard it was just your body not accepting the frequency or not balances in that frequency so the more we use each program you will begin to see more white because each frequency will be more strong in body.
~~~~~
You can also add some pink salt to the water you dip your bracelets in.
~~~~~
drink water and pop wet strips of kitchen paper on the skin with bands on top. I noticed that drinking water with lemon helps.
~~~~~
As far as I have been told you shouldn’t be going above 35%. Increasing the percentage doesn’t logically make the line go white because it has to do with connectivity. That being said I know that certain programs, where the Hz vary will occasionally go black when really low as it’s re-assessing what you are needing, and may go black then. Doesn’t mean it isn’t working.
Where the Hz stay the same like in a pain program or this one, one would expect it to stay white. Are you drinking enough water? Is it mineralized? Do you need a little US gel or water right under the wrist strap where you connect? Those things will all affect connectivity​.
~~~~~~
​The black line indicates that physical conductivity is NOT occurring. If you are tethered and using microcurrents, and ALL connections are secure, then corrective actions are in order. 
Hydration is fundamental to conductivity. Let’s presume you’re covered there. Then it’s the conductivity at the skin contact points. I use wrist straps when applying microcurrent programs. For conductivity I use a spray bottle with water and diluted Himalayan salt. I spritz my wrists, Plus the contact surface of the wristband before putting it on. 
Occasionally, the line will still go black. Sometimes all I have to do is move my wrist and the line is white again. Other times, a spritz or two or three will do the trick. 
I can sometimes go several hours with no conductivity issues.
​

Below are the programs for pain, which is the second group on programs on your list called local stimulation. So if it reads "Pain/Psyche" it is in this local stimulation program. Depression and Anxiety are the bottom programs.

I run the programs on my iPad So I'm not running it while I'm using my phone. However, here is how to use it as a stand-alone.

Summary:

There are sticky pads and electrode bracelets I like better. Due to company liability, I can not post them.
My email is: Elaine@ElaineWilkes.com

TIP: I put marker on the charging wire so I automatically know which side goes up.

The Healy programs below are also in a link on this site, if you wish to view them so they are larger. 
The next page under the training menu above is the quick start for using the Resonance app.

How to wear the Healy as a necklace: